Marble slab thickness: 2 cm or 3 cm?
Which marble thickness for floors, walls, stairs and countertops? Where 2 cm and 3 cm slabs are commonly used, and how thickness affects cost.
Updated:
Common practice
Indoors, floors laid on a full bed and wall cladding are most often 2 cm. Where the stone has to carry itself and a load — countertops, stair treads, window sills — 3 cm is generally preferred. These are common practices; the project specification decides the exact thickness.
Outdoors and facades
For facade panels hung on mechanical anchors, an engineer calculates the thickness from the panel size, wind load, anchor type and the stone’s flexural strength. Exterior paving that carries vehicles also needs thicker material. Make these decisions by calculation, not by guesswork.
Effect on cost
The thicker the slab, the fewer square metres a block yields and the heavier the freight: a 3 cm slab weighs half as much again as a 2 cm slab of the same area. So when you compare prices per square metre, make sure the thickness is the same.
