Skip to content
Karayel Mermer

Applications

Marmara marble flooring

Marmara marble on floors: which finish and thickness, which way to lay striped stone, and everyday care. For homes, hotels and public buildings.

Updated:

Finish and thickness

Honed is the most common finish for floors: it looks matt and hides footprints and scratches. Polished gives a glossy effect in dry, lightly used rooms. Indoors, 2 cm on a full bed is the usual choice; in heavily used areas the specification sets the thickness.

Laying direction

With striped Marmara marble the laying direction is part of the design. Stripes running along the long side make a room look longer; running across, wider. For the stripes to carry on from slab to slab, the pieces must be cut from the same block in sequence, so state this when you order.

Care

After laying, apply an impregnating sealer. Clean daily with a pH-neutral cleaner; vinegar and acidic products dull the surface. Mats at the entrances stop grit from scratching it. Years later the surface can be re-honed and polished in place, which is an advantage of natural stone over ceramic.