Skip to content
Karayel Mermer

Applications

Marmara marble stairs

Tread and riser thickness, slip resistance, nosing profile and stripe direction for marble stairs. Practical notes for stairs in Marmara marble.

Updated:

Treads and risers

Because a tread carries load and its edge takes knocks, 3 cm is generally chosen for treads and 2 cm for risers. The tread must be fully supported underneath; stone breaks where a void is left. Dimensions are taken from the real staircase, since each step can differ from the next by a few millimetres.

Against slipping

A polished finish is a risk on stairs. Use a honed or sandblasted surface on the treads; anti-slip grooves or a sandblasted strip near the nosing add safety. On outdoor stairs a bush-hammered surface is the safest choice.

Appearance

The nosing profile sets the character of the staircase: a straight chamfered edge looks modern, a half-round edge classic. With striped stone the pieces should come from the same block so that the stripes run the same way on every step. Landings and skirtings should be ordered from the same batch.